Categories
Contact Us

Cixi Xianghe Communication Equipment Co.,Ltd

Add:Dongfan Industrial Zone, Henghe Town, Cixi, Ningbo City, Zhejiang Province, China

Tel:86-0574-63191191

Mobile:86-15957487368

Fax:86-0574-63191191

Email:sales@xianghetx.com

News
Home > News > Content
High Strength, Corrosion Resistance, The Structure Is Mature, Reliable Sealing
Feb 07, 2018

For a variety of overhead fiber optic cable, pipelines, direct burial and other laid-through and branch connections.

Cable structure of the terminal room within the continuation.

The optical cable splice box is usually suitable for indoor or non-outdoor outdoor use, not suitable for outdoor use, to be used, should take protective measures. Operating temperature: Indoor: -5 ℃ ~ +40 ℃; Outdoor: -20 ℃ - +60 ℃.

Can play the role of protection and continuity, the box uses reinforced plastic, high strength, corrosion resistance, mature structure, reliable sealing, easy construction.

1, after the preparation of the disk wound around 1.5 times the optical fiber, then all the fiber coiled in the box.

2, single-core fiber on the disk, please use a single buffer tube, ribbon fiber, please use the strip buffer tube. Fastened at the entrance to the plate with nylon tie tie.

3, according to the provisions of docking two (with) optical fiber, the connector card slot snap into the welding unit, Yu Chang please coil in the disk.

4, the splicing plate cover, please press the card in place.

5, according to the required capacity of the connector box, determine the number of plates stacked on the welding plate, the type of superposition of the welding plate must be consistent with the optical fiber connector into the welding unit and inspection and maintenance requirements. Fusion plate every two superimposed, the rubber can be folded on the six holes, respectively, stuck on the upper and lower two on each of the three convex torsion; four rubber hinge, two symmetrical positions on both sides of the disk, such as the superposition of five Splice plate, according to the above method will be two-tier and three-tier disc buckle, three-tier and four-tier disc buckle, four-tier and five-disc disc buckle, and so on, the five stable stacked together . When you need to inspect or maintain a layer of splice welding situation, as long as the upper surface of the disc buckle the two folded, the splice tray can be opened as the same page.


  • Newsletter
  • Categories
  • Contact Us

    Cixi Xianghe Communication Equipment Co.,Ltd

    Add:Dongfan Industrial Zone, Henghe Town, Cixi, Ningbo City, Zhejiang Province, China

    Tel:86-0574-63191191

    Mobile:86-15957487368

    Fax:86-0574-63191191

    Email:sales@xianghetx.com

  • QR Code
  • Copyright © Cixi Xianghe Communication Equipment Co.,Ltd All Rights Reserved.