Categories
Contact Us

Cixi Xianghe Communication Equipment Co.,Ltd

Add:Dongfan Industrial Zone, Henghe Town, Cixi, Ningbo City, Zhejiang Province, China

Tel:86-0574-63191191

Mobile:86-15957487368

Fax:86-0574-63191191

Email:sales@xianghetx.com

Knowledge
Home > Knowledge > Content
To prevent corrosion and other damage
Feb 07, 2018

Cable fixed protection

Should have a cable entry, fixed and protective devices. The device will be introduced into the cable and fixed in the rack, cable and cable to protect the core from damage. The metal part of the optical cable is insulated from the metal frame, and the fixed metal cable sheath and the reinforced core of the optical cable should be reliably connected to the high-voltage protective grounding device.

Fiber termination function

Should have a fiber termination device. The device is convenient for cable core and pigtail operation, construction, installation and maintenance. Can be fixed and protect the joint parts straight without displacement, to avoid the impact of external forces, to ensure the coiled optical fiber core, pigtail from damage.

Tone function

Through the fiber jumper connector plug, can quickly and easily schedule fiber core serial number and change the optical transmission system.

Optical fiber core protection

Optical fiber cable stripping core protection device, fixed after the introduction of optical fiber termination device.

Corrosion resistance

Materials used in all parts of the ODF should have anti-corrosion properties. If the material is non-corrosive, it should be preserved; its physical and chemical properties must be stable and compatible with both the cable jacket and pigtail jacket. To prevent corrosion and other damage, these materials must also be compatible with the materials commonly used in other equipment.

Anti-corrosion performance

ODF surface plating of metal structures, salt spray test method for 48h salt spray test, the appearance of no visible macular rust.

Coating treatment requirements

The coating structure of the metal structure, the coating and the substrate should have good adhesion, adhesion should not be less than GB / T9286 standard Table I Level 2 requirements: at the intersection of the incision and / or along the edge of the incision Layer shedding, affected cross-cutting area was significantly greater than 5%, but not significantly greater than 15%.

Burning performance requirements

Equipment, non-metallic materials, structural components and optical connectors combustion performance should meet one of the following conditions:

1) The test sample did not ignite;

2) The test sample is kept flammable for less than 10 s from the fire and the flames or flaming or burning particles falling from the test sample do not cause the flames to spread to the bottom under the test sample.


  • Newsletter
  • Categories
  • Contact Us

    Cixi Xianghe Communication Equipment Co.,Ltd

    Add:Dongfan Industrial Zone, Henghe Town, Cixi, Ningbo City, Zhejiang Province, China

    Tel:86-0574-63191191

    Mobile:86-15957487368

    Fax:86-0574-63191191

    Email:sales@xianghetx.com

  • QR Code
  • Copyright © Cixi Xianghe Communication Equipment Co.,Ltd All Rights Reserved.